•  No Thermal Damage: Cold Plasma operates at low temperatures, preventing any thermal harm to the
  skin, ensuring it’s safe even for sensitive skin types.
•  Personalised Treatments: Each treatment is tailored to your specific skin type and concerns, enhancing
  its effectiveness and comfort.
• Minimal Downtime: Both plasma technologies are non-invasive, offering quick recovery times and visible
  results with minimal disruption to your daily life
• Versatility: Fusion Plasma can treat a wide variety of skin concerns, from acne and pigmentation to fine
  lines and skin laxity.
• Safety: Our advanced safety systems ensure Fusion Plasma is effective and safe for various skin types
  and conditions.
•  Quick Recovery: Thanks to its non-invasive nature, Fusion Plasma treatments have minimal downtime,
  allowing you to return to your daily activities swiftly.
• Long-Lasting Results: Fusion Plasma delivers lasting improvements, whether you’re tackling skin aging
  or simply seeking to enhance your skin’s overall health.
•  Ideal for All Skin Types Fusion Plasma is tailored for every skin type — from sensitive and dry to
  pigmented and acne-prone. It’s a safe, non-invasive alternative for individuals seeking visible
  improvements without irritation or damage.

Although the therapy is performed correctly, there are some potential risks, including but not limited to:
intolerance to the local anesthetic, infection at the treatment site, wound healing issues, scarring (which is
extremely rare), and pigment changes (such as hyperpigmentation or hypopigmentation). It is important to use
sunscreen with an SPF of 30 or higher for at least 2-4 weeks following the treatment.

Before Your Treatment
1. Avoid all forms of tanning (such as spray tanning, tanning injections, sun exposure, and tanning beds) for
2 to 4 weeks before your treatment. It is advisable to apply SPF 30 or higher to your skin for 2 to 4 weeks
prior to the treatment, especially if you have a naturally darker complexion. Additionally, using a
Tyrosinase Inhibitor for 4 weeks before the treatment is recommended to help prevent excessive pigment
production and minimize the risk of hyperpigmentation.
2. Avoid undergoing any other procedures on the area you plan to treat with Fusion Plasma, such as laser
therapy, chemical peels, Botox, or fillers, as these may prevent you from you from having a treatment.
• Refrain from using facial acids (like Retin A, salicylic acid, or glycolic acid) for 14 days before and 21
days after Fusion Plasma.
• No Botox or fillers for 21 days before or after Fusion Plasma.
• No Microneedling/PRP for 21 days before or after Fusion Plasma.

• No laser treatments or peels (depending on the intensity of the peel) for 90 days before or after Fusion
Plasma.

1. On the day of your treatment, you may experience a "stinging" sensation in the treated area,
similar to the feeling of a sunburn. This is normal and usually lasts for about an hour. The
following day, you may notice freckle-like or hyperpigmented spots on your skin. These spots will
gradually fade over the next 7-10 days, revealing smoother, rejuvenated skin.
2. The treated area will become swollen, do not apply a cool compress, but can use a fan, or blow cold air on
your skin (using the cool setting on some blow dryers, fans, or car air conditioning). Avoid taking anti-
inflammatory medications like aspirin, ibuprofen, or steroids if possible. You can take Paracetamol as and
when needed.
3. If your treatment is on your face or neck, it’s recommended to sleep on your back with your head elevated
to minimize swelling.
4. Do NOT cleanse the treated area until the following day or as directed. When you do cleanse, use only
the cleanser provided with your aftercare kit.
5. Refrain from exercising for 48 hours after the treatment and avoid exposure to heat, steam, or sweat, as
this can worsen inflammation.
6. Your technician will provide aftercare products and instructions. It is essential to follow the aftercare
protocol to speed up healing and prevent complications.
7. Do NOT apply occlusive dressings, sunblock, makeup, mascara, creams, or any other products to the
treated area until it is fully healed. Many ingredients in skincare products and cosmetics can irritate the
skin, cause allergic reactions, and slow the healing process, which may interfere with the desired results.
8. While the risk of infection is very low due to the nature of the Fusion Plasma treatment (which does not
create an open wound), the first 12 hours post-treatment are crucial for avoiding potential infection. Keep
the treatment area free from contaminants and avoid touching anything that may come in contact with it.
9. You can return to work the following day, but please note that you may not look your best during the initial
healing period (approximately 1-2 days).
10. Redness, swelling, and inflammation are normal for the first 1 to 3 days after treatment, depending on the
area treated. These effects are usually minor and temporary.
11. If you have any concerns, please contact your technician.

Do not wash your face for at least 5 hours, and preferably wait 12 hours after treatment. When you do cleanse,
use the post-care cleanser, applying it gently with your fingertips. DO NOT RUB HARD. Rinse with a damp
washcloth, gently dabbing to remove the cleanser. Again, avoid rubbing hard. Gently pat your skin dry. After
cleansing, refrain from applying anything else to your skin for 24 hours.
At Night:
Cleanse your skin gently as described above and pat it dry. Depending on the treated area(s), apply 2-3 pumps of
Growth Factor Gel to the affected area, followed by 1-2 pumps of Vital Wound Relief mixed with 1-2 pumps of
Therapy E. Pat this mixture onto your skin without rubbing.
In the Morning:
Gently cleanse your skin as described and pat it dry. Apply the Growth Factor Gel and the Vital Wound
Relief/Therapy E mixture to your skin. You may reapply the Vital Wound/Therapy E mixture throughout the day as
needed, but avoid over-saturating your skin. This step is intended for comfort. If you feel no discomfort, limit its
use to morning and night.
Follow this routine for 5 days post-treatment or until your skin no longer feels tender. Avoid using regular home
care products on the treated areas during the healing process.
In the first week after the treatment, do not expose treatment area to direct sunlight, wear a hat, and avoid public
bathing, sunbathing, tanning, sauna, beauty treatments and sweating. Keep area clean. Inadequate aftercare
procedures in healing phase of the skin can lead to poor results

1. Clients should be in good health at the time of their appointment, with no pre-existing health
conditions.
2. Treatment is not suitable for clients with open wounds or those who have used Accutane in the
past year.
3. The treatment area should not be inflamed before the procedure.
4. Individuals prone to keloid scars are not ideal candidates for this treatment.
5. Clients with diabetes, healing disorders, or lymphatic drainage issues should avoid this
treatment.
6. Clients with sunburn or suntan should wait at least 8 weeks or until the burn or tan has
completely healed before undergoing treatment.
7. Clients must not have active Herpes Simplex Virus (cold sores/fever blisters) in the treatment
area. If an outbreak occurs, they should reschedule their appointment. Clients with a history of
Herpes Simplex Virus should consult their doctor for a prescription of Valtrex and begin taking it 3
days before the treatment and continue for 4 days afterward.
8. Clients with a pacemaker should avoid treatments involving electrical arcing, as the currents may
interfere with the device's rhythm.
9. Pregnant or breastfeeding individuals are not suitable candidates for this treatment.
10. This treatment is only recommended for individuals with a Fitzpatrick skin type of 1-5. Those
outside this range may be at higher risk for hyperpigmentation.

This depends on the treatment and you skin condition that is being treated.